HELIX M ONE X – 24V Edition

HELIX M ONE X - 24V Edition
HELIX M ONE X - 24V Edition - Image 2
HELIX M ONE X - 24V Edition - Image 3

HELIX M ONE X – 24V Edition

Call for Price

SKU: HA11103 Category:

Description

Small, efficient and uncompromisingly stable – the M ONE X – 24V Edition is a highly compact monoblock for subwoofer applications. Designed from latest Class D technology this tiny amp can easily control speakers with 1 Ohm impedance. Its current capability makes the M ONE X – 24V Edition a perfect partner for 2 x 2 Ohms subwoofers, where both voice coils are connected in parallel. And for even more output power, two M ONE X – 24V Edition amplifiers can be combined to one single powerhouse – thanks to the TwinPower Link.
In addition a comprehensive and stunningly practical feature set leaves nothing to be desired. Last but not least installation will be a no-brainer due to the minimal dimensions.

Additional information

Product Type

Power Rating

Channels

Features

      • Small footprint Class D amplifier with up to 1,180 Watts RMS output power @ 1 Ohm for easiest combination with all 2 x 2 Ohms subwoofers connected in parallel
      • Start-Stop capability down to 12V supply voltage
      • Smart highlevel input with ADEP circuit and Auto Turn-On function
      • Integrated, active crossover with lowpass, bass boost, subsonic and phase control
      • TwinPower Link for connecting two amplifiers in bridged mode
      • Bass remote control for volume adjustment
      • Low heat dissipation thanks to extraordinary efficiency

      Special features

      Smart highlevel input

      The latest generation of OE car radios incorporates sophisticated possibilities of diagnosing the connected speakers. If a common amplifier will be hooked up failure messages and loss of specific features (e.g. fader function) quite often appear – but not with the M ONE X – 24V Edition.
      The new ADEP circuit (Advanced Diagnostics Error Protection) avoids all these problems without loading the speaker outputs of the OE radio during high volumes unnecessarily.

      Start-Stop capability

      The switched power supply of the HELIX M ONE X – 24V Edition assures operation even if the battery’s voltage drops down to 12 Volts during engine crank.

Technical

Power RMS ≤ 1% THD+N Normal operation
(One amplifier)		 TwinPower Link
(Two amplifiers)
– @ 4 Ohms 1 x 400 Watts 1 x 1,400 Watts
– @ 2 Ohms 1 x 700 Watts 1 x 2,060 Watts
– @ 1 Ohm 1 x 1,030 Watts –
– bridged @ 4 Ohms – –
– bridged @ 2 Ohms – –
Max. output power per channel*: Up to 1,180 Watts RMS @ 1 Ohm
Amplifier technology Class D
Inputs 2 x RCA / Cinch
2 x Highlevel speaker input
1 x Remote In
1 x Remote control input
Input sensitivity RCA / Cinch 0.5 – 6 Volts
Highlevel 1.1 – 13 Volts
Input impedance RCA / Cinch 20 kOhms
Input impedance highlevel 9 – 33 Ohms
Outputs 1 x Speaker output
Output voltage RCA / Cinch –
Signal converter for digital input –
Frequency response 10 Hz – 250 Hz
Bass boost 0 – 12 dB / 30 – 80 Hz
Highpass –
Lowpass 50 Hz – 250 Hz adjustable
Bandpass 10 Hz – 250 Hz adjustable
Subsonic 10 Hz – 50 Hz adjustable
Phase 0 – 180° adjustable
Slope high- / lowpass –
Slope subsonic / lowpass 12 / 24 dB/Oct.
Signal-to-noise ratio digital input –
Signal-to-noise ratio analog input 95 dB (A-weighted)
Distortion (THD) 0.20 %
Damping factor 150
Operating voltage 18 – 36 Volts (max. 5 sec. down to 12 Volts)
Idle current 400 mA
Operating temperature range -40° C to +70° C
Fuse 3 x 20 A Maxi-fuse (APX)
Power rating DC 24 V ⎓ 53 A max.
Additional features Active, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control
Dimensions (H x W x D) 50 x 320 x 154 mm /
2.00 x 12.60 x 6.06”

* In typical applications as subwoofer amplifier

Related products